Reset Search
 

 

Article

Broadcast/Multicast Rate Limiting Dropping Packets At Levels Lower Than Configured Rate Limit

« Go Back

Information

 
TitleBroadcast/Multicast Rate Limiting Dropping Packets At Levels Lower Than Configured Rate Limit
Symptoms
  • Switch port configured for rate-limiting drops packets below configured rate-limit
  • Affects broadcast and multicast rate-limit
  • Packet drops are reflected as inDiscards on affected port(s)
VSP4K:1#show interfaces gigabitEthernet error 1/5

 

====================================================================================================

                              Port Ethernet Error

====================================================================================================

PORT  ERROR   ERROR   FRAMES  TOO     LINK    CARRIER CARRIER SQETEST IN

NUM   ALIGN   FCS     LONG    SHORT   FAILURE SENSE   ERRORS  ERRORS  DISCARD

----------------------------------------------------------------------------------------------------

1/5   0       0       0       0       1       0       0       0       3069052
Environment
  • VSP 4000
  • VSP 8200
  • VSP 8400
  • All supported releases
Cause
Product functioning as designed
Resolution

Increase broadcast/multicast rate limit until no packets dropped

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255