Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

BGP Not Establishing Between VSP And Juniper SRX

« Go Back

Information

 
TitleBGP Not Establishing Between VSP And Juniper SRX
Symptoms
  • BGP not establishing between VSP and Juniper SRX
  • Loopback interfaces configured as BGP peer interfaces
  • VSP can ping Juniper SRX loopback interface
  • Juniper SRX can ping VSP loopback interface
Environment
  • VSP 4000
  • VSP 7200
  • VSP 8000
  • All releases
  • Juniper SRX
  • Release JUNOS 12.3X48-D30.7
Cause
Configuration issue
Resolution
  1. Add BGP peer update-source as local loopback on VSP
  2. Enable BGP peer
VSP:1#con t
Enter configuration commands, one per line.  End with CNTL/Z.
VSP:1(config)#router bgp
VSP:1(router-bgp)#neighbor <PEER_LOOPBACK_IPADDR> update-source <LOCAL_LOOPBACK_IPADDR>
VSP:1(router-bgp)#neighbor <PEER_LOOPBACK_IPADDR> enable
VSP:1(router-bgp)#

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255