Reset Search
 

 

Article

Ports not Unlocked After Applying License on VSP

« Go Back

Information

 
TitlePorts not Unlocked After Applying License on VSP
Symptoms
After loading the license file on the switch, the licence file is recognized. Yet, the ports are not getting unlocked.
Environment
VSP 7254XSQ
SW 8.0
Cause
The premier license did not include the port license to unlock the ports. 
Resolution
To unlock the ports on the switch, the port license is needed. It can be combined with the premier license or get the premier plus with MAC.
Additional notes
Administering VOSS Version 8.0 

Port Licensing for the Virtual Services Platform 7200 Series 

The VSP 7200 Series hardware models are available with twenty four 1/10 GbE SFP/SFP+ and four 40 GbE QSFP+ ports enabled by default. You must purchase a Port License to enable the remaining ports on the switch. You can use the Port License alone or combined with a Premier License or Premier License with MACsec at any time. When combining these licenses, the old license file must be deleted and the new license file that has the combination of Port and Premier or Premier with MACsec must be installed and loaded on the switch. 

See Feature Licensing on page 224 for more information about Premier License features. 

The Port License order code is 386914. 

Note: 
Port Licenses are not available with Trial Licenses. 



Release Notes for VOSS Version 8.0 

Port licensing support on the port licensed VSP 7254XSQ fiber switch: 
- 24 ports (Slot 1, ports 25 to 48) out of the 48 1/10 GbE SFP/SFP+ ports require a Port License to be unlocked. 
- two ports (Slot 2, ports 5 and 6) out of the six 40 GbE QSFP+ ports require a Port License to be unlocked.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255