Reset Search
 

 

Article

Failed Internal Loopback

« Go Back

Information

 
TitleFailed Internal Loopback
Symptoms
Below errors are shown during boot sequence:
Test 101  Flash  ID Read                  - PASSED
Test 121  System SROM Labels              - PASSED
Test 127  Other  SROM Labels              - PASSED
Test 131  DTS    Temperatures             - PASSED
Test 141  RTC    Clock                    - PASSED
Test 151  FANs   Status                   - PASSED
Test 161  Power  Supplies                 - PASSED
Test 175  PPACs  Status                   - PASSED
Test 181  USBs   PHYs Registers           - PASSED
Test 211  TSEC   Internal Loopback        - PASSED
Test 272  Ports  Internal Loopback        - 0:soc_reset_bcm56340_a0: LCPLL 1 not locked on unit 0 status = 0x00000000
0:soc_schan_timeout_check: soc_schan_op: operation attempt timed out
0:_soc_cmicm_schan_op: SchanTimeOut:soc_schan_op operation timed out cmc=0
  HDR[NACK=0 BANK=0 DMA=0 ECODE=0 ERR=0 DLEN=20 ACC=0 DPORT=13 OPC=9=WRITE_MEM_CMD]
  DW[ 0]=0x24d00a00 DW[ 1]=0x00010000 DW[ 2]=0x00000000 DW[ 3]=0x00000000
  DW[ 4]=0x00000000 DW[ 5]=0x00000000 DW[ 6]=0x00000000
FAILED
  SOCu   0 Misc Init Failed: rv=-9
Environment
ERS 4900 running any supported software
Cause
Hardware defect
Resolution
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255