Reset Search
 

 

Article

Switch Stops Displaying Output At SLPP Section When "show running-config" Executed

« Go Back

Information

 
TitleSwitch Stops Displaying Output At SLPP Section When "show running-config" Executed
Symptoms
  • When CLI command show running-config is executed the switch does not finish displaying the output and stops at SLPP section
ERS4950-S1#show running-config

! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 4950GTS-PWR+
! Software version = v7.5.0.007
!
! Displaying only parameters different to default
!================================================
enable
configure terminal
!
! *** AAA ***
!
!
! *** CORE (Phase 1) ***
<snip>

! *** MVR ***
!
!
! *** STACK MONITOR ***
!
!
! *** SLPP **   <==Output stops here

 
Environment
  • ERS 4950GTS-PWR+
  • FW:7.5.0.2   SW:v7.5.0.007
Cause
Issue with 7.5.0.007 release
Resolution
The switch was upgraded to release 7.6.2.019 and issue was not seen again
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255