Reset Search
 

 

Article

"STATUS" LED in red in a stack of 3 ERS 4950GTS-PWR

« Go Back

Information

 
Title"STATUS" LED in red in a stack of 3 ERS 4950GTS-PWR
Symptoms
New stack of 3 ERS 4950 was powered on. The 3rd unit "STATUS" LED was in red. All common parameters:  power status, fans, etc were working fine. 
Environment
  • ERS 4000
  • ERS 5000
Cause
This is caused because "Toggle Do-Post Selection" is in DISABLED state. 

1 - Launch Primary Agent-1 Vers: 7.6.2.019
2 - Launch Secondary Agent-2 Vers: 7.5.0.007
3 - Toggle Primary Agent Selection
4 - Download Agent/ Diag
5 - Reinitialize Agent Configuration Files
6 - Display Error Log
7 - Display System Information
8 - Continue Boot Sequence
9 - Reset
A - Power-Cycle
B - Toggle Do-POST Selection [ DISABLED ]
C - Run POST tests
Resolution
Reboot the unit and break the boot sequence.Change the B-Toggle Do-POST Selection option to ENABLED 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255