Reset Search
 

 

Article

Router-id not displayed completely in show ip ospf config

« Go Back

Information

 
TitleRouter-id not displayed completely in show ip ospf config
Symptoms
Router-id is not displayed completely in show ip ospf config.

Sample OutPut:

MLX2#show ip ospf config
Router OSPF: Enabled

Nonstop Routing: Disabled
Graceful Restart: Disabled
Graceful Restart Helper: Enabled
Graceful Restart Time: 120
Graceful Restart Notify Time: 0

Redistribution: Disabled
Default OSPF Metric: 10
OSPF Auto-cost Reference Bandwidth: Disabled
Default Passive Interface: Disabled
OSPF Redistribution Metric: Type2

OSPF External LSA Limit: 14447047

OSPF Database Overflow Interval: 0

RFC 1583 Compatibility: Enabled

Router id: 10.10.100.<------------------
BFD: Disabled

 

Environment
  • MLX
  • NI 5.8.00f
Cause
This is due to display issue in NI 5.8.0f due to limited space provided for router-id in "show ip ospf configuration" command output.
Resolution
Issue has been fixed in NI6.2.00e and NI6.3.00c.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255