Reset Search
 

 

Article

XCA Sites are not triggering on NAC / Access Control location rules

« Go Back

Information

 
TitleXCA Sites are not triggering on NAC / Access Control location rules
Symptoms
The rules are not working for Sites specified in the ECA controller as a location rule element in NAC / Access Control.
Environment
  • XCA
  • ECA
  • XMC
  • NAC
  • Access Control
  • Sites
 
Cause
The location for sites was not put into the correct format in the access control configuration.
Resolution
You need to configure your AP-ID is such a way to match the site configuration. The AP-ID section should be used to enter in the site name as a variable.
Methodology
Control->Access Control->Group Editor->Location Groups->Click Add->Click Add inside of Create group (after giving name)
Alter AP-ID accordingly->Click Add->Click Save
The below screenshot may offer guidance on elements to look for.
User-added image
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255