Reset Search
 

 

Article

100FX SFP module doesn't work in x440-8p.

« Go Back

Information

 
Title100FX SFP module doesn't work in x440-8p.
Symptoms
Uplink port of x440-8p doesn't come up if 100FX (P/N:10067) is used in it.

1) Levels of signals are normal:
X440-8p.7 # show ports 9 transceiver information detail 
Port :  9        
    Media Type            : 100FX#  
    Vendor Name           : SOURCEPHOTONICS  
    Part Number           : SPFEFXCDFMEX     
    Serial Number         : 11111-22222      
    Wavelength            : 1310 nm
 
    Temp (Celsius)            :  44.34      Status               :  Normal   
          Low Warn Threshold  :  0.00       High Warn Threshold  :  80.00   
          Low Alarm Threshold : -5.00       High Alarm Threshold :  90.00 
  
    Voltage AUX-1/Vcc (Volts) :  3.30       Status               :  Normal   
          Low Warn Threshold  :  3.00       High Warn Threshold  :  3.60    
          Low Alarm Threshold :  2.90       High Alarm Threshold :  3.70  
  
    Tx Power (dBm)            : -16.66      Status               :  Normal   
          Low Warn Threshold  : -20.00      High Warn Threshold  : -14.00   
          Low Alarm Threshold : -21.02      High Alarm Threshold : -13.00   

    Rx Power (dBm)            : -22.00      Status               :  Normal   
          Low Warn Threshold  : -30.96      High Warn Threshold  : -10.00   
          Low Alarm Threshold : -32.24      High Alarm Threshold : -9.00    

    Tx Bias Current (mA):        12.72      Status               :  Normal   
          Low Warn Threshold  :  0.20       High Warn Threshold  :  50.00   
          Low Alarm Threshold :  0.10       High Alarm Threshold :  60.00
2) Still port is down:
X440-8p.8 # show ports 9 configuration no-refresh 
Port Configuration
Port     Virtual    Port  Link  Auto   Speed      Duplex   Flow  Load   Media
         router     State State Neg  Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
9        VR-Default  E      R   OFF   100       FULL                    100FX#  
================================================================================
Environment
  • EXOS 15.x 16.x
  • x440-8p
  • 100FX SFP (P/N:10067)
Cause
Observed behaviour is because of CR: xos0068754.
Resolution
Upgrade to EXOS version where xos0068754 is implemented.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255