Reset Search
 

 

Article

10GBASE-CR SFP connected to 1G port

« Go Back

Information

 
Title10GBASE-CR SFP connected to 1G port
Symptoms
When connecting a 10G port to a 1G port, the following message is displayed on the switch with the 1G connection:

04/21/2015 07:46:38.81 <Warn:HAL.Port.OpticNotCompatPortType> : The SF+_CX10m optic module is not compatible with 100 BaseX or 1000 BaseX ports - please remove it from port 41.
 
Environment
EXOS
Cause
The 10GBASE-CR SFP pre-terminated twin-ax copper cable is connected from a 10G to a 1G port.
Resolution
Ensure that the 10GBASE-CR SFP pre-terminated twin-ax copper cable is connected to 10G port on both sides.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255