Reset Search
 

 

Article

S-Series: S180 - LSNat mib not responding under certain specific conditions - 10.152.40.16 1.3.6.1.4.1.5624.1.2.74

« Go Back

Information

 
TitleS-Series: S180 - LSNat mib not responding under certain specific conditions - 10.152.40.16 1.3.6.1.4.1.5624.1.2.74
Symptoms
  • LSNat mib not responding under certain specific conditions
Environment
  • LSNat Mib - 10.152.40.16 1.3.6.1.4.1.5624.1.2.74
  • Must be S180 Modules ( with legacy firmware and modules the issue does not happen
  • Must be more than 50 interfaces configured ( with fewer than 50 it does not happen )
  • some other features configured (OSPF, LACP, LSNAT, SNMP)
  • Power cycle the switch ( system reset is not enough )
Cause
Firmware issue : Very infrequently, after a reboot, the following MIBS will not function correctly:
• LSNAT
• NAT
• TWCB
MIB GET's will not return any data and MIB SET's will fail.
Resolution
Upgrade to Firmware Version 8.63.07

Workaround:

Reload the currently operating configuration using "configure slotx/conf"
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255