Reset Search
 

 

Article

AP 3935i's won't pull config after upgrading V2110 running on MS Server 2016 to 10.41.02

« Go Back

Information

 
TitleAP 3935i's won't pull config after upgrading V2110 running on MS Server 2016 to 10.41.02
Symptoms
  • After upgrading from v9 and v10.01.02, to 10.41.02, AP3935i's would get an IP, register with the controller successfully and would show as "Up" on the Wireless Availability and Active AP reports but would not accept the configuration attempting to be passed to them by the controller
  • ap.log displays:
Dec  4 18:14:26 krn: handleWASSP_ru_config_reply_handler: Cannot decode TLV
Dec  4 18:14:27 cap: 01113:ru_mgmt.c:2767-whsl_trans()-S_EDISC 16
Dec  4 18:14:28 cap: 01113:ru_mgmt.c:2767-whsl_trans()-S_EDISC 15
Dec  4 18:14:29 cap: 01113:ru_mgmt.c:2767-whsl_trans()-S_EDISC 14
Dec  4 18:14:29 cap: STEP<9> (2/3) @ 4:44.000: Request Configuration from AC,
Dec  4 18:14:29 cap: 01113:ru_mgmt.c:3233-ru_disc_flush_m2pkts()-0 packets flushed
Dec  4 18:14:29 cap: 01113:ru_snmp_config.c:156-ru_snmp_config_finish()-Send 68 bytes data to ac 10.2.0.5
Dec  4 18:14:29 cap: 01113:ru_mgmt.c:3262-handle_discov_pkts()-Recv_bytes: 2118
Dec  4 18:14:29 cap: 01113:ru_mgmt.c:3280-handle_discov_pkts()-receive 2118 byte data
Dec  4 18:14:29 cap: 01113:ru_snmp_config.c:172-ru_snmp_config_finish()-select: retval 1
Dec  4 18:14:29 cap: tlv_packet_decode: Recv incorrect attribute length, attribute = 0, attrlen = 65533
Dec  4 18:14:29 cap:   wassp_config_handler: Cannot decode packet
Dec  4 18:14:29 cap: 01113:ru_snmp_config.c:207-ru_snmp_config_finish()-tlv_ret=
 

 

Environment
  • V2110
  • Hyper-V
  • Microsoft Server 2016
  • AP3935
Cause
Under Investigation
Resolution
Back rev'ing to 10.31.07 was a successful workaround
Contact GTAC for more information - How to contact Extreme Networks Global Technical Assistance Center (GTAC)
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255