Reset Search
 

 

Article

AP3620 using DFS channels stuck in scanning after RADAR is detected

« Go Back

Information

 
TitleAP3620 using DFS channels stuck in scanning after RADAR is detected
Symptoms
AP3620 gets stuck in a constant scan when it is using DFS channels and RADAR is detected. 
Environment
  • ExtremeWireless
  • WS-AP3610, WS-AP3620
  • Version 9.21.10
  • DFS channels
  • RADAR
Cause
The cause is under investigation at this time.  Engineering would like as much data as possible. If you are having this issue, please contact GTAC
Resolution
  • Rebooting the AP has gotten the AP's out of scanning
  • Check the configuration and if the channel width is "Auto", please set it to 40 or 20 mhz. 
  • This article will be updated when a fix is available. 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255