Reset Search
 

 

Article

AP7502 Maximum power only when set to Smart-RF

« Go Back

Information

 
TitleAP7502 Maximum power only when set to Smart-RF
Symptoms
When power is set to Smart-RF, the AP7502 radios would only use maximum power. This is a known hardware limitation.
Environment
•All WiNG v5.X Software
•AP7502
 
Cause
This is a known hardware limitation.
Resolution
As a workaround, use static power (i.e., between 11-14). Then run a spot connection test for proper coverage. Adjust static power as needed.
Additional notes
Smart-RF not supported for channels as well, use ACS.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255