Reset Search
 

 

Article

Cannot add CEP port to VPLS service VMAN on x460 platform

« Go Back

Information

 
TitleCannot add CEP port to VPLS service VMAN on x460 platform
Symptoms
Error message appears when try to add CEP port to VPLS service VMAN on Summit x460:
X460-24t.20 # configure vman "BackboneVMAN" add port 10 cep cvid 100 
Error: Port 10 does not support L2VPN service VMAN with Customer Edge Port.
Environment
  • All EXOS versions
  • x460 platforms
  • VPLS, VMAN CEP
Cause
It is a hardware limitation of Summit x460.
 
Resolution
Summit x460 doesn't support selective VLAN mapping to VPLS and there is no workaround for this.
VLAN mapping to VPLS is supported on the following platforms:
  • Summit X460-G2 (supported from ExtremeXOS 15.6)
  • Summit X670-G2 (supported from ExtremeXOS 15.6)
  • Summit X670
  • Summit X770
  • BlackDiamond X8
More details can be found in User Guide.
Additional notes
On EXOS 15.x there will be no CLI error when you try to configure CPE port on VPLS service VMAN. This is CLI issue and it was fixed with CR xos0061128.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255