Reset Search
 

 

Article

Clients do not pass traffic when roaming wireless appliance pairs.

« Go Back

Information

 
TitleClients do not pass traffic when roaming wireless appliance pairs.
Symptoms
  • Clients do not pass traffic when roaming appliance pairs. 
  • Clients can connect to each wireless appliance pair but if they roam from one appliance to another, they are stuck (failing to pass traffic).
Environment
  • IdentiFi
  • ExtremeWireless
  • All Wireless Appliances 
  • All Firmware
Cause
Time between the wireless appliance pairs has drifted. The time should be no more than a 1 minute off.  
Resolution
Configure NTP on the wireless appliances or manually sync the time (not recommended).
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255