Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

Connectivity Problems and Error Slice Hardware Full

« Go Back

Information

 
TitleConnectivity Problems and Error Slice Hardware Full
Symptoms
  • firmware upgrade from  12.X to  15.3.1.4
  • User cannot connect to network
  • Error message in logs
Warnn:ACL.Policy.IntAppConfFail> Failed to install dynmic acl
esSrcIpLockdown_1001_c0a801cd for internal applicaton IpSecurity on vlan * port 1 .Error: ACL
install operation failed - slice hardware full for vlan *, port 1.
07/12/2017 08:15:21.57 <Erro:HAL.IPv4ACL.Error> EXOS application attempting to install
incompatible ACL: slice vlan *, port 1 (rule "esSrcIpLockdown_1001_c0a801cd", index -146)
07/12/2017 08:08:16.70 <Warn:ACL.Policy.IntAppConfFail> Failed to install dynmic acl
esSrcIpLockdown_1001_c0a801cd for internal applicaton IpSecurity on vlan * port 1 .Error: ACL
install operation failed - slice hardware full for vlan *, port 1.
07/12/2017 08:08:16.70 <Erro:HAL.IPv4ACL.Error> EXOS application attempting to install
incompatible ACL: slice vlan *, port 1 (rule "esSrcIpLockdown_1001_c0a801cd", index -145
)

 
Environment
  • Summit
  • IP-Security
Cause
  • Firmware Bug with IP-Security
  • CR xos0054316
Resolution
  • Upgrade to 15.4.1.3-patch1-11. or higher.
  • Disable IP-Security as a work around
Additional notes
`

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255