Reset Search
 

 

Article

EXOS switch slice is full when adding switch to analytics in an MLAG/Extended Edge (VPEX)/Policy scenario

« Go Back

Information

 
TitleEXOS switch slice is full when adding switch to analytics in an MLAG/Extended Edge (VPEX)/Policy scenario
Symptoms
EXOS switch slice is full when adding switch to analytics in an MLAG/Extended Edge (VPEX) topology with Policy. You will get the following message in XMC -
User-added image
Environment
  • EXOS All
  • Extended Edge (VPEX)
  • MLAG
  • Policy
Cause
Using onePolicy occupies 8 slices by default. Along with MLAG and Extended Edge, the slice usage becomes full and depending on the HW, we will be unable to add the switch to Analytics.
This is the expected behavior as mentioned in the user guide -
User-added image
Resolution
Please use command “configure policy resource-profile default profile-modifier <no-ipv4/no-ipv6/no-l2/no-mac>” to free up the resource which is not required.
You will need to disable and reenable policy as well. Example -
# disable policy
# configure policy resource-profile default profile-modifier no-ipv6
# enable policy

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255