Reset Search
 

 

Article

ExtremeCloud - Wireless Client not Passing Traffic

« Go Back

Information

 
TitleExtremeCloud - Wireless Client not Passing Traffic
Symptoms
  • Wireless client shows up in client report as connected, but is not passing traffic.
  • Switch-port configurations are correct and client's MAC address is being learned at the switch in the correct VLAN.
Environment
  • ExtremeCloud Wireless
  • 3.11.01-43
Cause
If the client traffic will be traversing the same VLAN as the AP management to the Internet, then the network needs to be set to the Default VLAN (untagged).
Resolution
  • Change topology to Default VLAN 1
  • Make sure the switch-port is set to a PVID (untagged VLAN) of whichever VLAN the clients are supposed to be in.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255