Reset Search
 

 

Article

S-Series Fabric chips SPI4.2 initialization failed

« Go Back

Information

 
TitleS-Series Fabric chips SPI4.2 initialization failed
Symptoms
  • I/O Module halt at boot 
  • Solid Red
  • Module reports the following messages during initialization:
“This device has encountered a hardware failure. Fabric chips SPI4.2 initialization failed. Please contact Support for a possible repair/replacement. Press <r> to reset board.”

 
Environment
  • S-Series
  • Firmware 8.32.01.0021 or older
Cause
The Serial Peripheral Interface (SPI) bus "SPI4.2" failed initialization
Resolution
Upgrade firmware to 8.32.01.0022 or superior. 
Additional notes
Please refer to the release notes for additional information

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255