Reset Search



Failed Slot - License Mismatch

« Go Back


TitleFailed Slot - License Mismatch
  • Slot in failed state
  • FAIL (License Mismatch)
  • Slot fails with reason "License Mismatch" after installing license key
  • SummitStack
  • Summit
  • EXOS
  • All active stack nodes must be using the same license level to function correctly
  • The new license must be installed on all slots
If the failed slot is not master-capable, first:
  1. Disconnect the failed slot from the stack.
  2. Enable master-capability by typing REBOOT AS MASTER-CAPABLE at the pending-AAA login prompt.
Once master-capability is enabled:
  1. Login to the switch and install the license key.
  2. Type "configure stacking slot <slot number> master-capability off" to disable master-capability and if neccessary connect the slot back to the stack.
  3. Reboot the slot so that it rejoins the stack.
Additional notes
  • If creating a stack of switches with different license levels, the slots with higher license levels can also be restricted to allow the stack to operate at a lower license level. The command is configure stacking slot <slot#> license-level <level>.
  • Another option could be to turn off master-capability on the switches in the stack that have the lower license levels.



Was this article helpful?



Please tell us how we can make this article more useful.

Characters Remaining: 255