Reset Search
 

 

Article

Firmware is not distributed to all blades in the chassis after downloaded

« Go Back

Information

 
TitleFirmware is not distributed to all blades in the chassis after downloaded
Symptoms
  • Firmware is not distributed to all blades in the chassis after downloaded
  • Firmware is downloaded onto master blade (full file, correct checksum), yet not copied onto other blades
  • Upgrade to many chassis (20+) with Inventory Manager Firmware Upgrade Wizard results in: Device Busy - Waiting...
  • Example of output in logging buffer:
<164>Dec 30 08:41:51 10.133.98.162 FileMgr[10.tImageSync]Data connection error (-1) for (12::/images/image1)
<164>Dec 30 08:41:51 10.133.98.162 FileMgr[10.tImageSync]downloadImage: Failed remote open(12:/images/image1); errno = 0x003d0004 [S_objLib_OBJ_TIMEOUT]
<165>Dec 30 08:41:51 10.133.98.162 FileMgr[10.tImageSync]Failure to download image (image1) from master (12).  Will retry (11/16)
<164>Dec 30 08:42:11 10.133.98.162 FileMgr[10.tImageSync]Data connection error (-1) for (12::/images/image1)
<164>Dec 30 08:42:11 10.133.98.162 FileMgr[10.tImageSync]downloadImage: Failed remote open(12:/images/image1); errno = 0x003d0004 [S_objLib_OBJ_TIMEOUT]
<165>Dec 30 08:42:11 10.133.98.162 FileMgr[10.tImageSync]Failure to download image (image1) from master (12).  Will retry (12/16)
Environment
  • S-Series
  • K-Series
  • Firmware 8.42.02 and lower
Cause
Firmware bug
Resolution
  • Upgrade to 8.42.03+
  • From release notes :
Host Services Problems Corrected in 8.42.03.0007
When transferring a new image using FTP, CLI prompt becomes unresponsive and a "Waiting for chassis to distribute image to compatible modules…" message appears.


 
Additional notes
While release notes state FTP, also applies to TFTP and SCP.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255