Reset Search
 

 

Article

How to configure a Static IP address on SR2200 & SR2300 Series Switches

« Go Back

Information

 
TitleHow to configure a Static IP address on SR2200 & SR2300 Series Switches
Symptoms
Statically Assign IP Address, Netmask, and Gateway via Console
Environment
  • Aerohive SR2200 or SR2300 Series Switches
  • RJ-45 to USB Console Cable
  • Console Software (ie. Putty, TeraTerm, Terminal)
Cause
Resolution
Connect your workstation via Console and open your Console Software, and login to the switch. 

To view IP info:
  • show network
To set Static Address:
  • network protocol none (Disables DHCP)
  • network parms <ip> <netmask> <gateway>
To set the management VLAN:
  • network mgmt_vlan <vlan>
To set the DNS Name Server:
  • Enter config mode: config
  • ip name server x.x.x.x
To set the Domain Name:
  • Enter config mode: config
  • ip domain name XXXX
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255