Reset Search
 

 

Article

IdentiFi AP Properties does not support intended Country of Operation when deploying a new AP Type

« Go Back

Information

 
TitleIdentiFi AP Properties does not support intended Country of Operation when deploying a new AP Type
Symptoms
Dropdown list does not include the correct Country.
Environment
IdentiFi
WS-C5210
Firmware 9.12.01.0067
WS-AP3825I

In the GUI under APs > Bulk Configuration > AP Default Settings > <AP Model> > AP Properties, within the provided dropdown list attempting to locate the Country of intended operation:

Country selection within AP Properties
Cause
Controller firmware does not support the new AP model number.
Resolution
Using release notes as a guide, upgrade the controller to at least the minimum firmware version necessary to support that AP Model for your Country.

For example, if a WS-C5210 controller running f/w 9.12.01.0067 has this problem while trying to deploy a WS-AP3825I Access Point, release notes (located here, on the Extranet) provide the following information:

Enhancements in 9.15.06.0010:
wns0011954  Adds country support for Saudi Arabia to the AP3805i/e under the ROW regulatory domain.
Enhancements in 9.15.03.0005:
wns0011503  Adds country support for Saudi Arabia under the ROW regulatory domain for the AP3865e.
Enhancements in 9.15.01.0121:
Adds country support for Saudi Arabia to the WS-AP3825i/e under the ROW regulatory domain.
Enhancements in 9.12.04.0003:
wns0011215  Adds country support for Saudi Arabia to the WS-AP3825i/e under the ROW regulatory domain.


From this it is clear that WS-AP3825I support in Saudi Arabia requires a minimum of controller firmware v9.12.04.0003.
Upgrade the controller to the minimum required firmware, or higher.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255