Reset Search
 

 

Article

K-Series Fabric Hardware Error Message During Boot

« Go Back

Information

 
TitleK-Series Fabric Hardware Error Message During Boot
Symptoms
Error message seen when consoled into fabric blade during cold boot:
==============================================================================
Message  14/119  Syslog Message            08.42.02.0012   06/10/2016 08:23:26

    <3>System[7]This device has encountered a hardware failure.  A fatal err
    or occured during the updating process!  Please contact Support for a po
    ssible repair/replacement.

==============================================================================
Message  15/119  Syslog Message            08.42.02.0012   06/10/2016 08:23:26

    <3>System[7]Failed to program bank 0 block 64.

==============================================================================
Environment
  • K-Series
  • All firmware versions
  • (Seen on 8.42.02.0012)
Cause
Potential hardware failure
Resolution
Contact Extreme Networks GTAC for possible RMA
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255