Reset Search
 

 

Article

K-Series firmware upgrade caused fabric to fail boot

« Go Back

Information

 
TitleK-Series firmware upgrade caused fabric to fail boot
Symptoms
  • K-Series fabric blade does not boot
  • Console output of:
This device has encountered a hardware failure. Fabric card MAC port driver initialization failed. Please contact Support for a possible repair/replacement. Press <r> to reset board.
  • Chassis power cycle brings the fabric up
Environment
  • K-Series
  • Upgrade from firmware 8.22.01 to 8.22.04
Cause
Fabric blade experienced a hardware failure.
Resolution
Replace blade per customer entitlement.
Additional notes
From a "show support"

============================================================================== 

Message 52/262 Syslog Message 08.22.04.0005 11/24/2014 06:14:17 

<3>System[11]This device has encountered a hardware failure. Fabric car 
d MAC port driver initialization failed. Please contact Support for a p 
ossible repair/replacement. 

============================================================================== 

Message 56/262 Syslog Message 08.22.04.0005 11/24/2014 06:14:17 

<3>bcmStrat[11.tRootTask]FATAL PCI error testing PCIM[0x14]: 
Wrote 0x203 
fdfc0, read 0x203fdf80, re-read 0x203fdfc0 

============================================================================== 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255