Reset Search
 

 

Article

K-Series Fabric Module in boot loop with message: Error! System Image Checksums do not match!

« Go Back

Information

 
TitleK-Series Fabric Module in boot loop with message: Error! System Image Checksums do not match!
Symptoms
  • CPU light blinking red
  • Same behavior in a different chassis
  • Module will not initialize and only shows:
 /flash0/ - Volume is OK 
Loading image1... 
Error! System Image Checksums do not match! 

/flash0/ - Volume is OK 
Loading image1... 
Error! System Image Checksums do not match!

 
Environment
  • K-Series
  • All firmware versions
Cause
Hardware failure causing corrupt flash
Resolution
Replace Fabric module via RMA             or
  • Contact the GTAC for assistance
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255