Reset Search
 

 

Article

MM-A (BDX-MM1) Module of a BDX8 Failed

« Go Back

Information

 
TitleMM-A (BDX-MM1) Module of a BDX8 Failed
Symptoms
Following message seen in the logs:

-> show slot 
Slots Type Configured State Ports Flags 
------------------------------------------------------------------------------- 
Slot-1 BDXA-10G48T BDXA-10G48T Operational 48 M 
Slot-2 Empty 0 
Slot-3 BDXA-10G48T BDXA-10G48T Operational 48 M 
Slot-4 Empty 0 
Slot-5 BDXA-10G48X BDXA-10G48X Operational 48 M 
Slot-6 Empty 0 
Slot-7 BDXA-40G12X BDXA-40G12X Operational 48 M 
Slot-8 Empty 0 
FM-1 BDXA-FM10T Operational 0 M 
FM-2 BDXA-FM10T Operational 0 M 
FM-3 Empty 0 
FM-4 Empty 0 
MM-A BDX-MM1 Failed 0 
MM-B BDX-MM1 Operational 0


and:

-> show slot detail 


MM-A information: 
State: Failed 
Download %: 100 
Flags: 
Serial number: 800432-00-09 1534G-01368 
Hw Module Type: BDX-MM1 
SW Version: 16.1.3.6 
SW Build: 16.1.3.6 
Configured Type: 
Ports available: 0 
Recovery Mode: Reset 
Debug Data: Peer=


 
Environment
  • BlackDiamond X8
  • EXOS All
  • BDX-MM1
Cause
The connection between the MM-A and the chassis failed health check. 
Resolution
  • Reseat the I/O module. 
  • If the errors continue after reseating, run diagnostics on both the I/O module and fabric module. If either of these fail, contact GTAC for an RMA
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255