Reset Search
 

 

Article

Matrix-X Does Not Add Port to VLAN

« Go Back

Information

 
TitleMatrix-X Does Not Add Port to VLAN
Symptoms
  • Configure a PVID and egress for VLAN335 

Matrix-X(switch-su)#set port vlan ge.1.1 335
Matrix-X(switch-su)#set vlan egress 335 ge.1.10 tagged
Matrix-X(switch-su)#clear vlan egress 1 ge.1.1
  • Messages display
JUL 27 12:59:04 Matrix-X CCAIPC@CM2: MAPPING SEND ERROR 0X80010007 TO CCA_SUCCESS DUE TO CCAIPC_SENDFLAG_NOFAIL FLAG, Q:0000000000 TO Q:0X3E86000F
- JUL 27 13:00:48 Matrix-X CCAIPC@CM2: WARNING: RPC R:1599(ENMSNMPSYSTEMGETRPC): FAILED TO REPLY TO Q:1073610758 WITH ERROR 80010007
  • Show VLAN 335 does not show active port ge.1.1   
Show vlan 335
VLAN 335 NAME: RDS_10.1.35 Status: Enabled
VLAN Type: Permanent FID: 335
Creation Time: 57 days 2 hours 41 minutes 21 seconds ago Egress Ports
lag.0.60;tg.11.1
Forbidden Egress Ports
None.
Untagged Ports
None.
Environment
  •  
    • X-Series
      • Firmware 2.0.3.0
Cause
LACP configured on the port
set port lacp port ge.1.1 padminkey 64
set port lacp port ge.1.1 padminstate lacpagg
Resolution
Remove the LACP config
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255