Multicast packet with TTL value 1 traffic is flooded in X690 and this issue is not seen on G2 platforms.
(54)------ Ixia2
Ixia(1)------(53) x690
(48)------ Hub
- Have added all ports in a “Default” vlan and sending multicast packet with TTL as “1” from Ixia(1).
- Though IGMP has been enabled on Default VLAN, Multicast packets are being flooded on port#54, 48.
X690-48t-2q-4c.15 # show port 48, 53, 54 stat no-refresh
Port Link Tx Pkt Tx Byte Rx Pkt Rx Byte Rx Pkt Rx Pkt Tx Pkt Tx Pkt
State Count Count Count Count Bcast Mcast Bcast Mcast
========= ===== =========== =========== =========== =========== =========== =========== =========== ===========
48 A 55618252 7119114457 0 0 0 0 0 55618235 -> Mcast pkt being forwarded. !!Issue!!
53 A 36 4739 65839833 8427479296 0 65839953 0 35
54 A 65835785 8426954755 0 0 0 0 0 65835767
========= ===== =========== =========== =========== =========== =========== =========== =========== ===========
> in Port indicates Port Display Name truncated past 8 characters
> in Count indicates value exceeds column width. Use 'wide' option or '0' to clear.
Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback