Reset Search
 

 

Article

When Attempting To Push Policy To A Switch: ERROR : SNMP Error: Commit Failed

« Go Back

Information

 
TitleWhen Attempting To Push Policy To A Switch: ERROR : SNMP Error: Commit Failed
Symptoms
  • When attempting to push policy to a switch errors are received  in the Enforce Preview window
ERROR : SNMP Error: Commit Failed (14). The attribute(s) contained in the failed SNMP packet were: etsysPolicyRuleResult1.20.18.6.0.138.0.0.0.0.15.2.0 (4095), etsysPolicyRuleResult2.20.18.6.0.138.0.0.0.0.15.2.0 (-1)
 
  • When looking at the Policy Manager "Enforce Preview", the "Statistics" tab is shows a red highlighted output of
"ALL ROLES, 907 (49 Ethertype, 2 MAC, 856 L3/L4, 0 IPv6)"
Environment
  • Summit
  • X450G2
  • X460G2
  • X670G2
  • X770
  • EXOS version 16.1
  • OnePolicy
Cause
The maximum number of L3/L4 rules for this platform on this version of EXOS is being exceeded
Resolution
Decrease the number of L3/L4 rules being applied to the switch
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255