Reset Search
 

 

Article

NetSight Warning Alarm: Device Memory Used %

« Go Back

Information

 
TitleNetSight Warning Alarm: Device Memory Used %
Symptoms
Getting the following memory related alarms in Netsight for EXOS switches.

User-added image
Environment
Netsight 8.1.4.40
Exos All
Cause
This alarm is a threshold alarm which means it should be triggered by XMC statistics collection.
Verify the memory utilization of the reported XOS switch using the command "show memory". Refer the article below for checking the memory utilization in EXOS.

How to check free memory and disk space in EXOS

If the memory utilization is not high from the switch perspective, this needs to be investigated in the Netsight.
Resolution
After the upgrade to 8.3 version, this issue is not seen anymore. If the issue is seen in the latest version of XMC, collect the following outputs and contact GTAC.
Go into "Reports" --> Custom Report
Target
--> Device
--> Switch that is throwing the alarm

Statistic --> Device memory used %

Once you generate the report hit the gear drop down at the bottom left and export to CSV.
Open Netsight Console and go into MIB tools. 
COllect the following MIBs on the device: 

extremeMemoryMonitorSystemFree
extremeMemoryMonitorSystemTotal

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255