Reset Search



OpenFlow 1.3 features supported in EXOS

« Go Back


TitleOpenFlow 1.3 features supported in EXOS
A selective number of OpenFlow 1.3 features were added to the EXOS implementation, as outlined below.  Any features not explicitly stated below, aren't yet available
EXOS 15.4 and ABOVE
  • Add support for OpenFlow version 1.3 by upgrading to OpenVswitch (OVS) version 2.1.
  • The OpenFlow Group table is supported for MPLS flows only. Otherwise, only a single table is supported in this release.
  • L2VPN with Static Pseudowire and Static MPLS Tunnel. (via OpenFlow Vendor Extensions)
  • MPLS Label Switching (for pseudowire only).
  • Forward between Normal VLAN/VMAN and OpenFlow Pseudowires using standard Ethernet flooding and learning.
  • Enable OpenFlow controlled traffic and normal traffic to be sent and received on the same VLAN/port.
  • Add a new global “hybrid” mode operation to allow the switch to operate as a normal switch, but also allow a controller to install flows that can affect any port and/or any VLAN.
  • Continue to support OpenFlow capabilities and scale that exist in EXOS 15.4.1.
Additional notes



Was this article helpful?



Please tell us how we can make this article more useful.

Characters Remaining: 255