Reset Search
 

 

Article

POE is showing Other Fault on all ports inlinepower

« Go Back

Information

 
TitlePOE is showing Other Fault on all ports inlinepower
Symptoms
Command show port inlinepower shows all ports with Oper Status of Other Fault

Support-> show port inlinepower


Port     Type          Oper             Admin  Priority Class Power Power PD     Power  Power 
         (truncated)   Status           Status                Limit Usage Type   Capab- Capab 
                                                              (mW)  (mW)         ility  Select
-------- ------------- ---------------- ------ -------- ----- ----- ----- ------ ------ ------
ge.1.1                 other fault      auto   low      0     15400 0     other  8023at 8023af
ge.1.2                 other fault      auto   low      0     15400 0     other  8023at 8023af
ge.1.3                 other fault      auto   low      0     15400 0     other  8023at 8023af
ge.1.4                 other fault      auto   low      0     15400 0     other  8023at 8023af
Environment
  • K-Series
  • Firmware 8.42.01.0004 and below
  • S-Series
  • Firmware 8.31.01.0006
Cause
  • Per release notes Statement: PoE controller might become inaccessible and not recover until module reset
  • S-Series chassis has no power shelf or
  • PoE supplies not installed or
  • PoE supplies are not powered up
  • PoE Subsystem Controller Cable not connected at back of Chassis
  • PoE Subsystem Power Bus not properly connected at back of chassis
Resolution
 
Additional notes
See also: S-Series Chassis No PoE Power detected or available

Part Numbers and descriptions:
  • S8-Chassis S-Series S8 Chassis and fan trays (Power supplies ordered separately)
  • S8-Chassis-POE4 S-Series S8 Chassis and fan trays with 4 bay PoE subsystem (System and PoE Power supplies ordered separately)
  • S8-Chassis-POE8 S-Series S8 Chassis and fan trays with 8 bay PoE subsystem (System and PoE Power supplies ordered separately)
  • S8-POE-8BAY-UGK S-Series 8 bay PoE upgrade kit for the S8 (PoE Power supplies ordered separately)
  • S8-POE-4BAY-UGK S-Series 4 bay PoE upgrade kit for the S8 (PoE Power supplies ordered separately)
  • S-POE-PS S-Series POE power supply, 20A, 100-240 VAC input, (1200/2000 W) (For Use in 4/8 Bay PoE power subsystems)

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255