Reset Search
 

 

Article

Port Collection target display same name seen in Reports and Custom Report UI

« Go Back

Information

 
TitlePort Collection target display same name seen in Reports and Custom Report UI
Symptoms
  • The two interfaces with the same "alias" value will end up having interface rpt_targets with the same "Display Name".
  • "FlexReport Interface Bandwidth Area" report, the "legend" section may end up listing two entries with the same display name.  This is the case for all interface related ports that show two or more interfaces.
Environment
Extreme Management Center 8.2 and lower
Cause
ifAlias was used to display port information.  Now if using ifAlias in port stats, update the  collector's display name to also append if the ifname, or subobjectid if ifname is not present. That way if you have ports 1 and 2 with alias phone you would get the following:

phone
phone

after fix
phone(1:1)
phone(1:2)
Resolution
Upgrade to the GA version of Extreme Management Center 8.3.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255