Reset Search
 

 

Article

Port In Static LAG Shows Blocking

« Go Back

Information

 
TitlePort In Static LAG Shows Blocking
Symptoms
  • Static LAG is not forming 
  • One Port in Static LAG in a blocking status
  • Command Show spantree stats active shows LAG port in blocking status 
  • Physical port in Static LAG is blocking 
Environment
  • Securestack
  • C5-Series
  • B5-Series
  • Firmware All Versions
  • Static LAG 
Cause
Unknown Cause
Resolution
1. Clear and reconfigure Static LAG example steps below
2. Type Clear static lag.0.1
3. Type Set lacp static lag.0.1 key 1 tg.1.49-50 
4. Verify Static LAG is formed 
5. Type Show lacp lag.0.1
6. Type Show spantree stats active 

 
Additional notes
Article for configuring a Static LAG on Securestack 
How to create a static lag on Modular and SecureStack switches

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255