Reset Search
 

 

Article

Port-up-down alarms/trap are not being triggered

« Go Back

Information

 
TitlePort-up-down alarms/trap are not being triggered
Symptoms
Port-up-down alarms are not being triggered on NMS when switch ports are changed to an up or down state.
Environment
  • Ridgeline 4.x
  • EXOS
Cause
  • Traps are not configured and enabled on the switch.
  • A trapreceiver is not configured on the switch.
Resolution
SNMP traps have to be enabled on the switch and selected ports to receive SNMP trap messages when the port goes up/down. The command is as follows:

enable snmp traps port-up-down ports[port_list| all]

Example:
enable snmp traps port-up-down ports all
Additional notes
A trapreceiver is required to be configured in conjunction with enabling SNMP traps.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255