Reset Search
 

 

Article

Ports do not link up after enabling 10G Upgrade License on EXOS device

« Go Back

Information

 
TitlePorts do not link up after enabling 10G Upgrade License on EXOS device
Symptoms
Ports do not link up after 10G upgrade license is installed
Environment
  • Summit: X440
  • EXOS: 21.1.1.4
Cause
10GbE Upgrade License requires ports to be configured with auto negotiation off with a speed of 10GB.
Resolution
Configure ports with auto negotiation off with a speed of 10GB.
 
configure ports <port#> auto off speed 10000 duplex full

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255