Reset Search
 

 

Article

Process CliMaster crashed with Signal 5

« Go Back

Information

 
TitleProcess CliMaster crashed with Signal 5
Symptoms
Process CliMaster crashed with Signal 5
Environment
EXOS 15.3.1.4
Sumit X460
Cause
A debugger can ask the CPU to look out for processes attempting to access specific addresses spaces or read/write to specific addresses. When the CPU detects such an event it will cause the EXOS Kernel to send a SIGTRAP (Signal 5) to the process initiating the access or read/write event.  The SIGTRAP then causes the process to terminate.
Resolution
The above process termination should not occur in normal operation.  As 15.3.1.4 is an unsupported firmware version for the Summit X460, upgrading to the recommended firmware version should be the first step.  The system can then be observed for a while to ensure the upgrade has stabilized the processes
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255