Reset Search
 

 

Article

Radio power setting is ignored when configured in GUI, works fine in cli

« Go Back

Information

 
TitleRadio power setting is ignored when configured in GUI, works fine in cli
Symptoms
In CloudIQ when I set manual transmission power in the Radio profile this setting has no effect and the APs continues to use the ACSP transmission power.
 
Environment
  • ExtremeCloud IQ
  • Radio transmit power set from GUI is not applied. 
  • Regulatory Regulations
Cause
This is functioning as designed. 
Resolution
This is (FAD) functioning as designed. We have to adhere to the channel and power max settings of the Regulatory in question depending on the country. 
The power limit depends on the country, AP type, band, etc. You can use the show ACSP and other command to check it.

show ver
show boot-param
show acsp
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255