Reset Search
 

 

Article

Radius Dynamic Authorization

« Go Back

Information

 
TitleRadius Dynamic Authorization
Symptoms
Disconnect the ongoing WIFI data session once the user reaches his/her quota limit by sending the Radius Disconnect message. 
Policy engine monitors the data usage through interim accounting packets and once the usage of a user reaches its predefined quota limit, policy engine sends the Disconnect message to the AP or the controller to disconnect the current session. udp port 3799
Environment
  • All Wing 5.x controllers 
  • All Wing 5.x AP's
Cause
Resolution
  • On Wlan, enable Radius Dynamic Authorization under “Advance”. 
  • Verify correct Radius Dynamic Authorization port number on AP and controller .   configuration>profile>advance>miscellaneous
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255