Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

Random connectivity issues between Pelco cameras and Extreme ISW 16802 switch

« Go Back

Information

 
TitleRandom connectivity issues between Pelco cameras and Extreme ISW 16802 switch
Symptoms
Intermittent connectivity issues between ISW switch and Pelco IP camera. The two devices will sometimes work for a while then stop with an apparent loss of PoE
Environment
  • ISW switch
  • Firmware version 01.01.02.0005
  • PoE
  • Pelco IP Camera IBP219-ER, IBP222-1R
Cause
There is a link Compatibility issue between the switch and camera.
Resolution
Enable ActiPHY

From GUI

Configuration Green Ethernet, Port Power Saving

From CLI

interface GigabitEthernet 1/1
 green-ethernet energy-detect
!
interface GigabitEthernet 1/2
 green-ethernet energy-detect


This will let the port power up for a short moment in order to determine if the cable is inserted
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255