Reset Search
 

 

Article

S-Series: Error after upgrade - restoreNvPortData(256): nonvol_get(NONVOL_MAJOR_PIOA_DOT1DBASEPORT_ENTRY,1001) = 3

« Go Back

Information

 
TitleS-Series: Error after upgrade - restoreNvPortData(256): nonvol_get(NONVOL_MAJOR_PIOA_DOT1DBASEPORT_ENTRY,1001) = 3
Symptoms
 
  • Error Displays during bootup
  • Usually after upgrade or config restore
<165>Jul 15 09:23:57 10.3.0.3 BrdgMIB[1.tusrAppInit]restoreNvPortData(256): nonvol_get(NONVOL_MAJOR_PIOA_DOT1DBASEPORT_ENTRY,1001) = 3
<165>Jul 15 09:23:57 10.3.0.3 BrdgMIB[1.tusrAppInit]restoreNvPortData(258): nonvol_get(NONVOL_MAJOR_PIOA_DOT1DBASEPORT_ENTRY,1003) = 3
Environment
  • S-Series
  • Firmware All
Cause
Rare condition where historic change in config store can leave a duplicate entry that results in this error.
Resolution
This should not be indicative of a problem and is a display only issue
No further action needed 

Either ignore the warnings at boot/restore time or to stop them you  can create a config file, and reboot to it (configure <slot>/<file>) and that should clear the stale entries.

If you have any config loss accompanying this issue then please open a case with GTAC for further investigation
How to contact Extreme Networks Global Technical Assistance Center (GTAC)
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255