Reset Search
 

 

Article

S-Series I/O module "detects a recoverable error FAP21V_MMU_CRC_ERR..."

« Go Back

Information

 
TitleS-Series I/O module "detects a recoverable error FAP21V_MMU_CRC_ERR..."
Symptoms
syslog reports message similar to:
<3>Dune[5.dTcmTask]FAP 3, slot 5 detects a recoverable error FAP21V_MMU_CRC_ERR(4) (reg=0x00000002) ... auto-recovery.

and in the faultlog the following:

==============================================================================
Message   5/92   Syslog Message            08.22.04.0006   06/14/2016 21:12:20
    <0>Dune[2.dTcmTask]This blade's fabric adapter (fap_idx=1) is detecting 
    an excessive number of recoverable memory errors.  The blade is reset. (
     0x00dcd7d0 0x012c9004 0x013038a4 0x01303b50 0x019ee424 0xeeeeeeee )
==============================================================================
Message   6/92   Syslog Message            08.22.04.0006   06/14/2016 21:12:18
    <3>Dune[2.dTcmTask]This blade's fabric adapter (fap_idx=1) is detecting 
    an excessive number of recoverable memory errors.  The blade is reset.
==============================================================================
Message   7/92   Syslog Message            08.22.04.0006   06/14/2016 01:50:50
    <3>Dune[2.dTcmTask]FAP 1, slot 2 detects a recoverable error FAP21V_MMU_
    CRC_ERR(7)	(reg=0x00000001) ... auto-recovery.
==============================================================================
Message   8/92   Syslog Message            08.22.04.0006   06/13/2016 16:49:14
    <3>Dune[2.dTcmTask]FAP 1, slot 2 detects a recoverable error FAP21V_MMU_
    CRC_ERR(5)	(reg=0x00000001) ... auto-recovery.
==============================================================================

Once the blades fabric adapter detects an excessive number of recoverable memory errors it will reset the blade and will log this message when it resets

 
Message 7/154 Syslog Message 08.22.01.0023 07/11/2016 22:18:33 

<0>Dune[13.tusrAppInit]0x01223ad0 0x01223ad0 0x0123cbe8 0x012faf30 0x013 
e4c4c 0x013e4d18 0x013e4f3c 0x013e1b50 0x013649e4 0x0126d800 0x0126cc38 
0x0124a644 0x0045345c 0x0283c8d8 0x0283e78c 0x028488c0 0x00b3b550 0x0314 
4fe4 0x02846768 0x02830518 0x02847154 0x00957f04 0x019ed524 0xeeeeeeee ( 
0x00dcca24 0x01223684 0x01223b04 0x0123cbe8 0x012faf30 0x013e4c4c 0x013 
e4d18 0x013e4f3c 0x013e1b50 0x013649e4 0x0126d800 0x0126cc38 0x0124a644 
0x0045345c 0x0283c8d8 0x0283e78c 0x028488c0 0x00b3b550 0x03144fe4 0x0284 
6768 0x02830518 0x02847154 0x00957f04 0x019ed524 0xeeeeeeee )
 

 
Environment
  • S-Series
  • Firmware all
Cause
  • Memory error
  • Potentially Faulty hardware in the FAP chip
Resolution
Please contact GTAC for technical assistance. 
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255