S-Series: Not seeing network and application response times in flow analytics from switch
Not seeing network and application response times in analytics
Flows are seen so there is some netflow information being received
Only one side of the communication is seen
In order to see actual flows generated on ports we need a policy configuration to scan for the data in the packets. It needs to include at least two ports as it scans only on the inbound or RX (ingress) part of the data. We need to see the SYN+SYN/ACK in the mirrored traffic in order to get the network and application response times.
Configure policy on ports where both sides of the communication ingress in order to see both sides of the communication