Reset Search
 

 

Article

S-Series: Reset with <0>DeltaLst[5.tDSrecv5]Add error, entry = 0x0db545d4, next = 0x00000000, prev = 0x0db545e4, head = 0x0db545e4, tail = 0x0db545d4 RfmAgeLst

« Go Back

Information

 
TitleS-Series: Reset with <0>DeltaLst[5.tDSrecv5]Add error, entry = 0x0db545d4, next = 0x00000000, prev = 0x0db545e4, head = 0x0db545e4, tail = 0x0db545d4 RfmAgeLst
Symptoms
Blade reset with the following:
 
<0>DeltaLst[5.tDSrecv5]Add error, entry = 0x0db545d4, next = 0x00000000, prev = 0x0db545e4, head = 0x0db545e4, tail = 0x0db545d4 RfmAgeLst 
​( 0x00ff8f60 0x007eaf5c 0x00eac758 0x00eb1700 0x00eb53ec 0x00eb5794 0x0083c47c 0x0084c950 0x0084dcb0 0x01c85fe4 0xeeeeeeee )
Environment
  • S-Series
  • Firmware 8.62.xx
  • Dedicated tunnel loopback port
Cause
Under Investigation 
Resolution
Workaround :
Disable all L2 protocols (LLDP, CDP, STP, GVRP, LACP) on the dedicated tunnel port
Remove the dedicated tunnel port from static vlan egress (clear vlan 1)

Solution

Under Investigation. 
Please open a case - How to contact Extreme Networks Global Technical Assistance Center (GTAC)
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255