Reset Search
 

 

Article

S-Series Router reset when making a change to BGP configuration

« Go Back

Information

 
TitleS-Series Router reset when making a change to BGP configuration
Symptoms
  • set BGP connections to our vendor
  • Configured BGP
  • command no network 10.40.0.0/19.
  • The router hung and stopped responding for several seconds passing no traffic. It then came back up on its own and the change had not been completed.
  • Support log shows
  • Syslog Message 08.22.02.0011 06/29/2016 08:27:02Message 5/81
<0>sms[5.tRtrPtcls]SMS assert in qbraloc1.c at line 1297 : == ((route_cb
->aggr_obscured_route->loc_change_lqe)).next 0x0x25181c7c NULL 0x0x0 ( 0
x00dcd2dc 0x01db1d9c 0x004c1bac 0x004c1c6c 0x01f65a00 0x02d007c0 0x02d08
cb4 0x02d09984 0x02cf16bc 0x02cf249c 0x02cd72c0 0x02d59554 0x01f6cb24 0x
004b1448 0x004b1904 0x004b1c38 0x004b7408 0x004e2be8 0x01dbb8f8 0x01db9f
48 0x019eeca4 0xeeeeeeee )
core file written
system reset.
Environment
S=Series
Firmware 8.22.02.0011
Cause
Unknown
Resolution
  • Upgrade to current GA release
  • Contact GTAC for Assistance
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255