Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

S-Series : runs out of memory and resets with error including "Injection Point: memPartLib.c:2853" and "memPartAlloc: block too big"

« Go Back

Information

 
TitleS-Series : runs out of memory and resets with error including "Injection Point: memPartLib.c:2853" and "memPartAlloc: block too big"
Symptoms
runs out of memory and resets with a message similar to:
Message 10/267 EDR Record 08.42.01.0008 12/07/2015 16:59:13
Severity/Facility: FATAL/KERNEL
Task: tSshM1
Injection Point: memPartLib.c:2853
Address: 0x00000000
memPartAlloc: block too big 65536 bytes (0x10 aligned) in partition 0x68b03c0
Traceback Stack:
0x006ca5cc
0x006c9048
0x00424ab0
0x01ab11fc
0x01ab139c
0x01ab19a8
0x00f579a8
0x01a7c9a8
0x01a7c940
0x0078424c
0x00784cf8
0x005c5164
0x005c5930
0x027c1020
General Registers:
msr : 0x0000b032 lr : 0x01ab117c ctr : 0x00000000
pc : 0x01ab117c cr : 0x88008288 xer : 0x20000000
r[ 0]:0xffffffff r[ 1]:0x3df397f0 r[ 2]:0x0436f2b0 r[ 3]:0x3df39870
r[ 4]:0x01ab1d24 r[ 5]:0x00000000 r[ 6]:0x00000000 r[ 7]:0x00010000
r[ 8]:0x00000010 r[ 9]:0x00000000 r[10]:0x00000000 r[11]:0x3df3986c
r[12]:0x03521580 r[13]:0x05e75450 r[14]:0x00000002 r[15]:0x1fd13cc0
r[16]:0x00000001 r[17]:0x035dbcf4 r[18]:0x00000000 r[19]:0x1abad010
r[20]:0x3df9f060 r[21]:0x1fd13cc0 r[22]:0x00000000 r[23]:0x1c0b7ce0
r[24]:0x00110001 r[25]:0x00000000 r[26]:0x00000010 r[27]:0x00010000
r[28]:0x00000000 r[29]:0x00000000 r[30]:0x01ab1d24 r[31]:0x068b03c0


 
Environment
  • S-Series
  • Firmware 8.42.01
  • Firmware 8.61.01
The following blades:
  • ST1206-0848
  • SG1201-0848
  • ST1206-0848-F6
  • SG1201-0848-F6
when installed with following option modules:
  • SOK1208-0204
  • SOK2208-0204
  • SOK2209-0204
  • SOGK2218-0212
  • SOTK2268-0212
are vulnerable to running out of memory and resetting with a message similar to the above.

They are especially vulnerable to this after issuing the commands show config and show support.
Cause
Firmware issue was introduced in version 8.42.01 and corrected in version 8.42.02
Also now seen in 8.61.01 firmware 
Resolution
For the 8.42 track of firmware upgrade to the following firmware or higher  :
  • 8.42.02.0013 for S130/S150/S155
  • 8.42.02.0012 for S180/S140
For the 8.61 track of firmware upgrade to the following or higher :
  • 8.61.02 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255