Reset Search
 

 

Article

S-Series constant resets after FW Upgrade to 8.62.03.06

« Go Back

Information

 
TitleS-Series constant resets after FW Upgrade to 8.62.03.06
Symptoms
Constant resets after upgrade to 8.62.03
with the following errors in faultlog on every line card in the chassis
 
Fuji[1.tNimIntr]Switch Chip 0 (Slot 1 Mainboard) detected fatal condition
Fuji EDF MAIN intr: Fuji=0, Adr=0, Reg=0x00010000

Fuji[2.tNimIntr]Switch Chip 0 (Slot 2 Mainboard) detected fatal condition
Fuji[2.tNimIntr]Fuji EDF MAIN intr: Fuji=0, Adr=0, Reg=0x00010000
Dune[2.dTcmTask]Petra[1] Received Interrupt PB_FDR_FDRBUN_EXP_CELL instance 0, count 1, value= 0x1

Fuji[3.tNimIntr]Switch Chip 1 (Slot 3 Mainboard) detected fatal condition
Fuji[3.tNimIntr]Fuji EDF MAIN intr: Fuji=1, Adr=0, Reg=0x00010000

Fuji[4.tNimIntr]Switch Chip 0 (Slot 4 Mainboard) detected fatal condition
Fuji[4.tNimIntr]Fuji EDF MAIN intr: Fuji=0, Adr=0, Reg=0x00010000


 
Environment
  • S-Series 
  • Upgrading to Firmware Version 8.62.03
  • L2 tunnel 
  • Mirror tunnel
Cause
With more than one L2 tunnel configured or a mirror tunnel configured upgrading to this image causes a reset.
Resolution
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255