Reset Search
 

 

Article

S-Series Interrupt errors - "Received Interrupt PB_NIF_SRD_LANE_INT"

« Go Back

Information

 
TitleS-Series Interrupt errors - "Received Interrupt PB_NIF_SRD_LANE_INT"
Symptoms
The following error messages are seen in the syslog with an incrementing count:
  • Received Interrupt PB_NIF_SRD_LANE_INT   
  • Received Interrupt PB_NIF_SRD_INT instance 1
Example:
2039  2015/10/02 09:26:17 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_LANE_INT from slot 2 (fuji 1), count 0, value= 0x800 
2040  2015/10/02 09:26:17 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_INT instance 1 , count 1, value= 0x1 
2037  2015/10/02 13:35:43 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_LANE_INT from slot 2 (fuji 1), count 0, value= 0x800 
2038  2015/10/02 13:35:43 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_INT instance 1 , count 2, value= 0x1 
2035  2015/10/02 22:23:08 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_LANE_INT from slot 2 (fuji 1), count 0, value= 0x800 
2036  2015/10/02 22:23:08 Syslog Message 08.32.02.0008 <3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_INT instance 1 , count 3, value= 0x1

Similar messaging could be seen in S-Series debug message logs:
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_MAL_RX_PCS_DESKEW_ERR_FATAL_INT from slot 2 (fuji 4), count 139, value= 0x1
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_MAL_ERROR_INT from slot 2 (fuji 4), count 308, value= 0x1
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_MAL_RX_PCS_LOCAL_FAULT_INT from slot 2 (fuji 4), count 304, value= 0x1
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_MAL_RX_PCS_LN_SYNC_STAT_CHANGE_INT from slot 2 (fuji 4), count 150, value= 0x4
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_MAL_LINK_STATUS_CHANGE_INT from slot 2 (fuji 4), count 304, value= 0x1
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_LANE_INT from slot 2 (fuji 4), count 0, value= 0x40
<3>Dune[2.dTcmTask]Petra[0] Received Interrupt PB_NIF_SRD_INT instance 0, count 133, value= 0x1
Environment
  • S-Series
  • Firmware 08.31.02.0014 
  • Firmware 08.32.02.0008
Cause
Possibly faulty hardware but requires verification by GTAC
Resolution
Contact GTAC for assistance with diagnosis

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255